8
Pan detection
The pan detection ensures a perfect safety.
The induction doesn’t work:
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display shows [ U ].
The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidly big quantities of water, like noodles
cooking.
Start up / Stop the booster function:
Action
Control panel
Display
Zone selection
press key [
] from booster zone
[ 0 ]
Increase power
press key [ + ]
[ 1 ] to [ 9 ]
Start up the booster
press key [ + ]
[ P ]
Stop the booster
press key [ - ]
[ 9 ]
Power management:
The cooking hob is equipped with two booster functions. When the booster function is activated,
and not to exceed the maximum power, the electronic system orders to reduce automatically the
power level of another heating zone. The display is blinking on [ 9 ] during a few seconds and
then shows the maximum of power allowed :
Heating zone selected
The other heating zone:
(example: power level 9)
[ P ] is displayed
[ 9 ] goes to [ 7 ] depending the type of zone
Timer
The timer can be used simultaneous with all 4 heating zones and this with different time settings
(from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time :
Action
Control panel
Display
Zone selection
press key [
]
[ 0 ]
Increase power
press key [ + ]
[ 1 ] to [ 9 ]
To select « Timer »
press simultaneously [ - ] and [ + ]
Timer [ 00 ]
Decrease the time
press key [ - ]
30,29….
Increase the time
press key [ + ]
time increase
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the times reaches [ 00 ].
To stop the cooking time:
Action
Control panel
Display
Zone selection
press key [
]
[ 0 ]
Select « Timer »
press simultaneously [ - ] and [ + ]
the remaining time
To stop the « Timer »
press [ - ]
[ 00 ] then stops
