Award Evo 1116, Installation Manual, Page: 4 / 16

• If the hood is to be used at the same time as gas fuelled or other fuelled appliances (not applicable to
appliances exclusively designed to blow air into the room) the room must be properly ventilated.
• Regulations regarding air evacuation must be complied with.
• With the aim of constantly improving our products, we reserve the right to modify their functional
characteristics or their appearance.
Installation should only be carried out by qualified professionals, professional installers or the official
technical service. The manual or installation guide must be read with care before starting the installation
process.
When opening the packaging, check that all the components are in perfect state and all the accessories
are present. If this is not the case, contact the dealer and do not install.
Once installed, any damage to
the exterior such as scratches, dents, stains, etc. will not be covered by the guarantee.
VERY IMPORTANT!
DO NOT REMOVE THE PROTECTIVE PLASTIC FROM THE HOOD UNTIL
IT IS COMPLETELY INSTALLED, IF THIS PLASTIC IS NOT PRESENT IN AREAS THAT COULD
HAVE A RISK OF DAMAGE DURING INSTALLATION, IT IS RECOMMENDED TO APPLY
PROTECTIVE MATERIALS AGAINST IMPACT, SCRATCHES AND CONTACT WITH CORROSIVE
AGENTS.
TAKE ESPECIAL CARE DURING THE INSTALLATION IF OTHER WORK IS ALSO IN PROGRESS,
BECAUSE PAINT, SILICON, PLASTER AND OTHER MATERIALS COULD CONTAIN CORROSIVE
CHEMICALS THAT MAY DAMAGE THE PRODUCT, IN THESE CASES IT IS RECOMMENDED TO
ADEQUATELY PROTECT THE HOOD, BY FOR EXAMPLE, HERMETICALLY COVERING AREAS
THAT COULD BE AFFECTED WITH PLASTIC.
THIS WILL AVOID DAMAGE TO THE OUTSIDE OF THE APPLIANCE, SOMETHING THAT WILL NOT
BE COVERED BY THE GUARANTEE.
2. RECOMMENDATIONS TO BEAR IN MIND BEFORE INSTALLATION.