11
2
1
4
3
5
POSITIONING/ATTACHMENT
The drying cabinet must be
level on a flat
surface
,
resting on all four feet.
If there is a need for adjustment, lean the
cabinet and adjust the adjusting feet. Check
with a spirit level that the cabinet is level.
1. Plastic plug
2. Wall behind drying cabinet
3. Spacer
4. Rear wall of drying cabinet
5. Fixing screw with washer
The drying cabinet must not be placed in an environment in which high-pressure water
is used for cleaning.
The drying cabinet is intended only for location indoors in a dry place and secured to a wall.
CAUTION
The drying cabinet must not
be used without being secured to a wall
owing to the risk of tipping over forward.
Bear in mind that the cabinet is top-
heavy and there is a risk of it tipping over.
This adjustment should be carried out by
two people.
The cabinet must be
attached to a wall
to
prevent tipping over.
1
Open the door and drill 8 mm holes in the
wall through the two pre-drilled holes in
the rear of the drying cabinet
.
2
Fit the plastic plugs in the wall. Thread the
spacer onto the screw and fit with washer
as illustrated. Screws are contained in the
assembly kit.
Spirit level
Pre-drilled holes
Attaching to a wall also means a better
door seal.
