-
+
MODE
A
En d
Programming as determining the Cooking Period and Finish Time
This function is used to adjust the cooking period by using of automatically cooking
function.
Both cooking period and ending time have to be adjusted to adjust the ending of
cooking period. The cooking period is adjusted as determined above.
Mode key was pressed until End indicator lamp will flash in order to adjust the
ending time. + and - keys must be used at the end of wished cooking period.
Once the time is adjusted , it is registered automatically in 5 seconds following the
adjustment and A and symbols starts to light continuously. The screen returns to the
current time. An alarm sound is heard at the end of the time and A symbol starts to
flash. Pressing any switch stops the signal and lamp to flash.
10
20
30
40
50
70
80
90
60
100
M
0
30
40
10
20
50
70
80
90
60
100
M
0
Manual Operation
When you set the timer
knob to M position as
seen in the illustration
on left side, the oven
can be operated
continuously. The oven
can never be operated,
when the timer knob is
in 0 position.
4.4.2 Use of Mechanical Timer
Operation with time set
Turn the timer knob in
clockwise direction in
order to set time between
0-100 minutes as seen
in figure on right side.
When the adjusted time
ends, oven is turned off
and a single warning
sound is heard.
11
Digital Timer Sound Adjustment :
There are 3 different audible warning levels available. To choose between them, start with
the timer showing the time of day. Press the '93-'93 (minus) button for 1-2 seconds and
the timer will give an audible signal beep. At this stage, each time the '93-'93 button is
pressed, the timer will sound the next audible warning (signal beeps) in the sequence. Once
the desired sound is heard, do not press any further buttons, and the timer will save the
last selected signal warning sound. This needs to be reset in the event of a power failure.
All manuals and user guides at all-guides.com
