16
INSTRUCTIONS FOR THE USER
12
OVEN DOOR REMOVAL
The oven door can be removed to give easier access
to the oven when cleaning.
To remove, proceed as follows:
• Open the oven door and insert rivet or nail (R) in the
hole (F) of the hinge (fig. 11).
• Partially close the door, forcing it upwards at the
same time to free stop tooth and hinge sector.
• Once the hinge is free, pull the door forwards tilting
it slightly upwards to free sector.
• To reassemble proceed in the reverse order, paying
attention to the correct position of sectors.
HOW TO CLEAN THE INNER OVEN DOOR
GLASS
One of the features of our cookers is that the inner oven
door glass can be easily removed for cleaning without
the aid of specialized personnel. Just open the oven door
and remove the support
securing the glass (fig. 12).
ATTENTION!!
This operation can be done also with the door
fitted on appliance, but in this way, pay attention
that when the glass is pull upwards, the force of
the hinges can close the door roughly.
LOCK AT LEAST ONE HINGE
(fig.11)
13
REPLACING THE OVEN LAMP (fig. 13)
Ensure the appliance is switched off before
replacing the lamp to avoid the possibility of
electric shock..
In the event one or both oven lamps need replacing, the
new lamps must comply with the following requisites:
15 W - 230 V~ - 50 Hz - E 14 - and must be resistant
to high temperature (300°C).
The appliance can have two different types of lamp
holder:
• Draw out the side guide rails as described above.
Then, remove the glass protection cap (V) from
the bulb socket, lifting it with a screwdriver placed
between the cap and the oven wall and replace the
lamp (L). Fit the accessories back in reverse order.
OVEN SIDEWALL GRIDS (fig. 10)
To allow for a better cleaning of the side grids, you can
extract them this way:
1. Push with a finger on the last of the slots to release
the grid from its hold.
2. Lift it towards the top and extract the grid.
To put them back into place, reverse the order of this
operation.
11
Summary of Contents for A7061S
Page 27: ...27 461308282 10 2014 ...
Page 28: ...SPACE FOR DATA LABEL ...
