34
3 Operation
3.4 Charging
3.4.1 Charging the BP
Please adhear to the following procedure
when charging the BP:
1.
2.
3.
4.
5.
6.
7.
Charge the BP within 24 hours of each
cycle of use. During longer periods of
storage (for example during off-season)
make sure to maintain a state of charge
at 80% in order to avoid irreparable total
discharge of the BP.
Before charging the BP, place the charger
on a clean level surface with enough
clearance for the BP once connected.
Ensure that there are no foreign objects
in both the charger connector and BP
connector and dry with a towel to remove
any moisture.
Connect the provided C14 power cable
connector to the charger. Connect to a
suitable wall outlet.
Lift the BP with both handles and align
the front locking slots with the locking
pins on the charger.
Push the locking handle down and
towards the charger until the locking slots
fully engage the pins. The locking handle
should be parallel to the top of the BP.
To initiate charging, place the magnetic
PKL in one of the receptacles on the
BP. There are several indications that
charging has commenced: The charger fan
will power on; The
Bluetooth LED will turn blue and the
charge LEDs will light up and begin to
scan sequentially from left to right.
