WF900i- DAB+ Internet Radio with Docking for iPod/ iPhone
10
3 Getting started/ setup
Although the WF900i is sophisticated, getting started is simple. To play DAB or FM radio, all you need
is a power source (a 100-240 V mains supply).
For Music Player mode, you need either a USB stick with music files or a wired/ wireless Ethernet
network and a UPnP music server (e.g. a PC).
For Internet-connected modes such as Internet radio, you also need a broadband Internet connection.
1. Place WF900i on a suitable shelf or table
2. Connect the power adaptor between WF900i and the mains supply.
3. To receive broadcast radio (DAB and FM), extend the telescopic antenna.
4. Press Standby.
3.1
Setting up wizard
When WF900i is started for the first time, it runs through a setup
wizard to configure settings for date/time and network. Once this has
finished, the system is ready to use in most modes.
Note: To change these settings later, select
Menu >
System settings
>.
To run the setup wizard again, select
Menu >
System settings
>
Setup wizard
.
Select
Yes
to start the setup wizard.
Note: If you want to use a wired network, bypass the setup wizard.
If you choose
No
, the next screen asks if you would like to run the
wizard next time WF900i is started. The system then starts without
configuring time/date and network settings and enters the Main Menu.
Note: If power is removed while the wizard is in progress, the wizard
will run again next time WF900i is started.
