manualshive.com logo in svg

AWA TFTD94G, Owner'S Manual

Share
Download
AWA TFTD94G Owner'S Manual Download Page 24

OWNERÕS MANUAL

Setting up TV stations

Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the PR+ / PR- or NUMBER buttons to scan the
stations you programmed.
Stations can be tuned using automatic or manual modes.

Note

: In some models up to 100 CH stations can be stored.

Auto programme tuning

All stations that can be received are stored by this method. It is recommended
That you use auto programme during installation of this set.

1

Repeatedly press the MENU button and then press VOL+/- button to select  the TUNING menu.

2

Press the PR - button to select AUTO.

3

Press the VOL+ button to begin auto programming.

4

Press the VOL+ button. Select a TV system with the PR+/- button on the SYSTEM
pull-down menu.

BG : (Asia/New Zealand/M.East/Africa/Australia)

I    : (Hong Kong/South Africa) - (option)

DK : (East Europe/China/Africa/CIS)
L    : (France/Monaco)

5

Press the ENTER or VOL - button.

6

Press the PR+/- button to select STORAGE FROM.

Summary of Contents for TFTD94G










































Reviews:

No comments

Brands by name

Popular brands

Load more brands