INSTALLATION
-8-
STEPS:
PC
Be sure both the TV and computer are
set to Power off.
1.Connect a VGA and audio cable.
2.Connect the power cord.
3.Power on the TV, switch to PC mode.
4.Power on the PC.
This connection and power-up sequence
is very important.
ANTENNA
Note:
Aerial connections: IEC (female).
Input impedance: 75 unbalanced.
REAR AV Connections
All the terminals are (from left to right):
, Audio input, YPbPr (component video) input,
HDMI2 input.
Note: 1.
and YPbPr share one audio channel.
2. When the HDMI2 port receives a DVI signal, the matching audio signal is received
from the YPbPr/
Audio input.
AC POWER INPUT, AV1 input
AV1
AV1
SIDE AV Connections
All the terminals are (from left to right):
USB, PC Audio input,
(composite video and audio) VGA input,
Note: When HDMI1 receives a DVI signal, the matching audio signal is received from the PC
Audio input.
AV output
,
Antenna socket,AV2 Input,HDMI1.
Plug (not supplied)
Outdoor antenna (not supplied)
For optimum digital TV reception,
the use of high quality shielded 75
coax cable is recommended.
VGA and audio cable
not supplied
AC-INPUT
100-240V~ 50/60Hz
