AWA LT20D, User Manual

Page: 17 / 20

&%
&"
If the signal from the system equals to the standard signal mode, the screen is adjusted auto-
matically. If the signal from the system doesn't equal to the standard signal mode, adjust the
mode with referring to the videocard user guide because the screen might not display or only
the power LED might be on. For the display modes listed below, the screen image has been
optimized during manufacture.
APPENDIX A: Display modes
Mode
VGA
Resolution
720 * 400
640 * 480
640 * 480
640 * 480
Horizontal
Frequency
(KHz)
31.469
31.469
37.500
43.269
Vertical
Frequency
(Hz)
70.087
59.940
75.000
85.008
Pixel Clock
Frequency
(MHz)
28.322
25.175
31.500
36.000
Using FLOF to Select a Teletext Page
NOTE: The teletext feature dose work with TV, AV,
S-Video signals.
The various included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the
remote control.
1. Display the teletext contents page by pressing the
TV/TEXT ( ) button.
2. Press the colored button corresonding to the topic that
you wish to select (The available topics are listed on
the status information line).
Result: The page is displayed with additional color-
coded information that can be selected in the same
way.
3. To display the: Press the:
Previous page Red button
Next page Green button
NOTE: The teletext feature dose work with TV, AV,
S-Video signals.
Up to four teletext pages can be stored.
1. Select the LIST mode.
Result: For 3-digit numbers are displayed in differ-
ent colors at the buttom of the screen.
2. Press the colored button corresponding to the page
that will be replaced.
3. Enter the new page number using the numeric buttons.
4. Repeat steps 2 and 3 for each page to be stored,
using a different colored button each time.
5. Press the STORE button until the corresponding
blocks are displayed in white.
The LIST button is used to switch between:
LIST mode/FLOF mode
Storing Teletext Pages