Picture
Mode
Contrast
Brightness
Color
Sharpness
MENU
Back
EXIT
Watch TV
PICTURE
PICTURE
Tint
Dynamic
60
50
50
0
0
Picture
Mode
Select the type of picture which best corresponds to your viewing requirements by selecting Picture
Mode in PICTURE menu. The following picture effects are available: Dynamic, Standard, Mild and
Memory. Dynamic, Standard and Mild are the factory preset mode. If you want to change the value
of Contrast, Brightness, Color, Tint (NTSC only), Sharpness or Color temperature on the picture
menu, the Memory option is selected automatically.
&
You may select the picture mode directly by pressing the PMODE button on the remote control.
Contrast
Adjust the contrast of the picture.
Brightness
Adjust the brightness of the picture.
Color
Adjust the color saturation.
Note:
This option is invalid in PC and DVI mode, and it will be shown in gray.
Tint
Adjust the tone of color when your system is in NTSC.
Sharpness
Adjust sharpness level of the picture.
Color temperature
Select a optimum color temperature mode to suit your eyes for viewing among
Normal (balance),
Warm (reddish) Cold (bluish).
DNR (Digital Noise Reduction)
If the broadcast signal received is weak, you can select the DNR option to reduce the video noise
level between Auto, Low, Mid, High and off.
Advanced
This option allows you to select the level of Flesh tone, Green tone, Blue tone or Cinema mode.
Note:
If cinema mode is set to Auto, cinema mode will be detected automatically when you are playing
a movie with cinema mode.
1. Press the MENU button to display the OSD main
menu.
2. Press the
t
/
u
button to select
PICTURE
in
the main menu.
3. Press the
p
/
q
button to select your option what
you want to adjust in the PICTURE menu.
4. Press the
t
/
u
button to adjust.
5. When you are satisfied with your adjustment,
press the EXIT button to return to the previous
menu or press the MENU button to exit the main
menu.
PICTURE MENU
18
