AWA HD 3388, User Manual

Page: 9 / 43

.
There are many different types of TV/VCR and other equipment that you can connect to your Set Top
Box. Shown below are the most common methods normally used. If you have problems with your
connections and need help, contact your retailer.
Connecting to the TV via HDMI/YPbPr
This method is recommended for the best picture quality.
Note: Cables are not supplied with the Set Top Box. Make sure that both the TV and the Set Top Box
are switched off at the power outlet.
- Connect the antenna to the ANT IN of the Set Top Box.
- Connect the ANT OUT of the Set Top Box to the RF input of the TV.
- Connect the HDMI/YPbPr/R+L outputs of the Set Top Box to the inputs of the TV if available.
- Turn on the Set Top Box and the TV.
- Select the HDMI or Component input mode on the TV (refer to TV manual).
Optional audio connections
Instead of connecting the Left and Right Audio outputs to your TV, they can be connected to your
Hi-Fi stereo for better sound quality. In this case, connect the Left and Right Audio outputs from the
Set Top Box to the Left and Right Audio inputs on your Hi-Fi Stereo.
lf you have a home theatre receiver with built in DolbyTM digital decoder, then connect the SPDIF
output (coaxial or optical)of the digital TV Set Top Box to the SPDIF input of your home theatre
receiver.
7