Remote control
Install the batteries into the remote control. Point the remote control at the
remote sensor on the front panel. The remote control works within about 8
metres from the sensor and within an angle of about 30 degrees from the left
and right side.
Take out of the batteries when it is not being used for a long time.
Don't expose the sensor in direct sunlight.
Not e:
Do not mix the old and new batteries or different types of batteries.
Weak batteries can leak and severely damage the remote control.
Remote Control Operation
Battery Installation
2
3
1
Remove the battery
compartment cover on the
back of the remote control.
Insert two AAA/1.5V batteries
into the battery compartment
following the indications (+, -)
inside the compartment.
Replace the cover.
-13-
