background image

910-260100-0140-100

Specifications

Frequency Range

: FM 88 - 108  MHz

AM 540 - 1600 KHz

Power Consumption

: 15W

Power Source

: AC 240V ~50Hz

Antennas

: External antenna for FM

: Built-in ferrite bar for AM

Speaker

: 4" dynamic type x 2

* DESIGN AND SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE.

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or

moisture.

CAUTION:

Use of controls or adjustments or performance of procedures other than those specified

may result in hazardous radiation exposure.

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER - SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within an equilateral

triangle, is intended to alert user to the presence of

uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute

risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended

to alert user to the presence of important operating and

maintenance (servicing) instruction in the literature

accompanying the appliance.

CAUTION

For Compact Disc Units Only:

Invisble laser radiation when open and interlock failed or

defeated. Avoid direct exporsure to laser beam.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

04-09-08

IMPORTANT SAFEGUARDS FOR AUDIO PRODUCTS

PLEASE READ CAREFULLY THE FOLLOWING IMPORTANT SAFEGUARDS THAT ARE

APPLICABLE TO YOUR EQUIPMENT.

1. Read Instructions -

 All the safety and operating instructions should be read before the

appliance is operated.

2. Retain Instructions -

 The safety and operating instructions should be retained for future

reference.

3. Heed Warnings -

 All warnings on the appliance and in the operating instructions should

be adhered to.

4. Follow Instructions -

 All operating and use instructions should be

followed.

5. Water and Moisture - 

The appliance should not be used

near water-for example, near a bathtub,washbowl,kitcken

sink,laundry tub, in a wet basement, or near a swimming

pooland the like.

6. Carts and Stands -

 The appliance should be used only with a

cart or stan that is recommendedby the manufacturer.

6A.

An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart combination

to overturn.

7. Wall or Ceiling Mounting -

 The appliance should be mounted to a wall or ceiling

only as recommended by the manufacturer.

8. Ventilation -

 The appliance should be situated so that its location or position does

not interfere with-its proper ventilation.For example, the appliance should not be

situated on a bed, sofa, rug,or similar surface that may block the ventilation openings;

or, placed in a built-in installation, such as a bookcase or cabinet that may impede

the flow of air through the ventilation openings.

9. Heat -

 The appliance should be situated away from heat sources such as radiators,heat

registers, stoves,or other appliances (including amplifiers) that produce heat.

10.Power Sources -

 The appliance should be connected to a power supply only of the

type described in the operating instructions or as marked on the appliance.

11.Grounding or Polarization -

 Precautions should be taken so that the grounding or 

polarization means of an appliance is not impeded.

12.Power -

 Cord Protection - Power-supply cords should be routed so that they are not

likely to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at  plugs, and the point where they exit from the appliance.

13.Cleaning -

 The appliance should be cleaned only as recommended by the manufacturer.

14.

This product is designed for use with the antenna attached and should not be connected

to any other external antennas.

15.Nonuse Periods -

 The power cord of the appliance should be unplugged from the 

outlet when left unused for a long period of time.

16.Object and Liquid Entry -

 Care should be taken so objects do not fall and liquids

are not spilled into the enclosure through openings

17.Damage Requiring Service -

 The appliance should be serviced by qualified service

personnel when:

A. The power-supply cord of the plug has been damaged;or

B. Objects have fallen, or liquid has been spilled into the appliance;or

C. The appliance has been exposed to rain;or

D. The appliance does not appear to operate normally or exhibits a marked change

inperformance; or

E.The appliance has been dropped, or the enclosure damaged.

18.Servicing -

 The user should not attempt to service the appliance beyond that described

in the operating instructions. All other servicing should be referred to qualified service

personnel.

POWER SOURCE

Unwind the AC POWER CORD (23) at the back of the unit and connect it to a

power outlet.

RADIO OPERATION

1. Turn the unit ON by turning the VOLUME CONTROL (17) from the Off position,

then turn the FUNCTION SWITCH (16) to the RADIO position.The LED tube 

will light up and start the 7-colour changing sequence. The half moon Display 

Area will start it’s 3-colour changing sequence and the CD Door Blue LED light

will light up.

2. Adjust the volume by turning the VOLUME CONTROL (17).

3. Select the desired waveband by placing the AM/FM BAND SWITCH(15) in 

either the AM or FM position.

4. Open the DIAL DISPLAY DOOR (3). Select the desired station on the TUNER

DIAL (1) by turning the TUNING CONTROL (2).

5. Turn the unit OFF by turning the VOLUME CONTROL (17) to the Off position.

ANTENNA

For FM reception, the unit is provided with an external wire antenna. Move the wire

until the reception is clear and with no interference. Do not connect an external

antenna to an outside antenna.

CD OPERATION

PLAYBACK

1.  Switch the FUNCTION SWITCH (16) to select CD mode.

The LED tube will light up and start the 7-colour changing sequence. The half 

moon Display Area will start it’s 3-colour changing sequence and the CD Door

Blue LED light will light up.

2. Press the CD DOOR (4) in at the push open symbol “   ” to open the door.

3.  Load a CD with the label side facing out. Gently press the CD to lock it into the

player.

4.  Close the CD DOOR (4). The display will flash “

— —

“ for a few seconds. The 

display will then show the total number of tracks on the CD. “

no

” will be shown

if there is no disc loaded. “

Er

” will be shown if the CD cannot be read.

5. Press the PLAY/PAUSE BUTTON (7) to begin playback. The LED DISPLAY 

(11) changes to “01” and CD begins to play the first track.

6.  Adjust the VOLUME CONTROL (17) to the desired listening level.

7.  To pause playback, press the PLAY/PAUSE BUTTON (7). The LED DISPLAY 

(11) will flash. Press the PLAY/PAUSE BUTTON (7) again to resume playback.

8.  To stop playback, press the STOP BUTTON (8).

SKIP FORWARD AND REVERSE

1. Press the FORWARD SKIP BUTTON (5) or the REVERSE SKIP BUTTON (9)

to select a desired track.

2. Press the PLAY/PAUSE BUTTON (7) to start playback of the selected track.

SEARCH FORWARD AND REVERSE DURING PLAYBACK

1. Press and hold the FORWARD SKIP BUTTON (5) or the REVERSE SKIP 

BUTTON (9) while the song is playing. Release the button when  you have 

reached the desired point of the song and playback will continue.

2. Release the button at the desired point, playback will resume automatically.

MODEL : 2601

Instruction Manual

Reviews: