NOTE:
When software IPC Device Search is used for search, which employs multicast
protocol to search network information on the equipment across segments, and no multicast
data packet is permitted by any firewall, so a firewall must be disabled to acquire network
information on the equipment.
NOTE:
: In case that access to IE by the equipment may fail due to IP address conflict, the IP
address has to be changed.
Changing procedure: Select the IP address to change > put down the correct parameters >
enter the password > click Change.
Step 2:
Run the IP search tool Device Search provided in the CD as attached.
Search IP address for the equipment within the segment by clicking Search button. Any IP
address acquired for the equipment and information on HTTP port will be displayed as
below.
22
IP CAMERAS | NDAA SERIES
