3.
Drill into surface at marked drill holes deep enough to
accommodate for mounting hardware.
• If using the included hardware, insert the three drywall
anchors into holes in the mounting surface and align holes
in camera mounting plate with anchors. Then use included
screws to secure mounting plate and camera to surface.
5.
Mounting complete.
6.
Focus & Zoom Controls
a. For Manual Lens, find Focus and Zoom adjustment screws and
use a small flathead screwdriver to adjust lens to desired view.
b. For Motorized Lens, please use DVR’s local interface or mobile
device to adjust focus and zoom levels from the camera’s
PTZ/Lens menu to desired view. Should more assistance be
needed with this step, please feel free to visit our website
or contact our Helpdesk number.
Mounting Screw
Drywall Anchors
Set Screws
4.
Loosen set screws (pictured below) with included security
wrench.
Adjust the camera to desired angle, then tighten screws and
then place the magnetic ring back onto the camera.
FOCUS
ZOOM
PLEASE CONFIRM THAT VOLTAGE OF POWER SUPPLY USED MATCHES
POWER REQUIRED BY CAMERA, OTHERWISE PERMANENT DAMAGE OR
RISK OF FIRE MAY OCCUR
CAUTION
Power Supply
DVR
Camera
BNC Video Output
Power Connector
CCTV Power Supply
12VDC
Power Outlet
LAN USB DC12V
VGA
SETUP DIAGRAM
5
PACKAGE CONTENTS
6
Zoom
Focus
ZOOM
FOCUS
Varifocal Turret Dome Camera
Mounting Template
Drywall Anchor x 3
Mounting Screw x 3
L-Wrench
DC Plug Terminal Block
Need help?
Visit us online for up-to-date software and complete instruction manuals.
1) Visit www.avycon.com
2) Search for the model number of your product.
3) Click on your product and find appropriate documents on product page.
RESOURCES
7
[email protected]
www.avycon.com
1 (949) 752-7606
1 (888) 833-4611
[M-F, 6am-5pm PST]
Technical Support E-mail :
Technical Support Website :
US Helpdesk Number :
Toll Free Number (Canada) :
VARIFOCAL TURRET DOME CAMERA
