1. Insert network cable through the screw nut, rubber ring and the screw bolt.
2. Insert the rubber ring into the screw bolt;
3. Connect the screw nut to the screw bolt;
4. Place the O-Ring on the network port connector;
5. Connect the RJ45 to the network port connector, tighten the screw bolt and the connector.
NOTE:
If placed in an extremely wet environment, for added protection you can wrap the
connector in electrical tape to prevent standing water to accumulate on connector.
7
5MP AUTO-TRACKING PTZ BULLET CAMERA | AVC-LHN51SVT-A1S
How to Connect the Waterproof Connector
Network Port Connector
LAN
Screw Bolt
Rubber Ring
Screw Nut
O-Ring