Route and connect the cables .
Secure the mounting base with camera to the wall with screws as
shown below.
Bracket adjustment. Before adjustment, preview the image of the
camera on a monitor and then loosen the fixed ring to adjust the view
angle of the camera.
③
5. NETWORK CONNECTION
①
Make sure that the camera and the PC are well connected via LAN.
②
Find the IP-Tool from the CD and then install it in the computer.
After that, run the IP-Tool as shown below.
Here we take accessing IP camera via LAN for example.
④
⑤
Tighten the fixed ring after the adjustment.
⑥
1. Access Through IP-Tool
③
④
⑤
The default password of the administrator is “123456”
The default username is admin; the default passowrd is
123456
Modify the IP address. The default IP address of this camera is
192.168.226.201. Click the information of the camera listed in the
above table to show the network information on the right hand.
Modify the IP address and gateway of the camera and make sure its
network address is in the same local network segment as that of the
computer. Please modify the IP address of your device according
to the practical situation.
For example, the IP address of your computer is 192.168.1.4. So the
IP address of the camera shall be changed to 192.168.1.X and the
gateway shall be changed to 192.168.1.1. After modification, please
enter the password of the administrator and click “Modify” button to
modify the settings.
Double-click the camera listed in the IP-Tool or manually enter the
IP address in the address bar of the web browser to connect IP-CAM.
Then follow directions to download and install the plugin.
Enter the username and password in the login interface.
Device
Network
Search
Immediate
Refresh
name
name
name
IPC
IPC
IPC
unknown
unknown
unknown
192.168.226.201
192.168.1.2
192.168.1.3
80
80
80
9008
9008
9008
255.255.
255.255.
255.255.
Modify Network Parameter
Mac Address
IP Address
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
226
. 201
255
.
255
.
255
. 0
192
.
168
.
226
. 1
i
Tip: Enter the administrator password, and
then modify the network parameters.
Total Device: 3
Local IP Address:192
.
168
.
1
.
4 Subnet Mask:255
.
255
.
255
.
0 Gateway: 192
.
168
.
1
.
1 DNS
：
210
.
21
.
196
.
6
Device Name Device Type
IP Address
Http Port
Data Port Subnet
Product Model
About
Subnet Mask
Gateway
Restore IPC Default Configuration
MENU
I PC
Network Cable
Computer
Network Cable
Switch
Router
Fixed Ring
Pan 360
°
Tilt 80
°
Mac Address
IP Address
Modify Network Parameter
Modify
CE :98 :23 :75 :35 :22
192
.
168
.
1
. 201
255
.
255
.
255
. 0
192
.
168
.
1
. 1
Subnet Mask
Gateway
