Attach the mounting template to the location where you want to
mount the camera and then drill the screw holes and the cable hole on
the wall according to the mounting template.
Route the cables and connect the relevant cables. Then fasten the
mounting base to the wall with the screws provided.
To adjust the bracket, first preview the image of the camera on a
monitor and then loosen the fixed ring to adjust the view angle of the
camera.
Tighten the fixed ring in place and installation is completed.
②
③
5. NETWORK CONNECTION
①
Make sure that the camera and the PC are connected to the local network.
②
Install IP-Tool from the CD and run it after installation.
In LAN, there are two ways to access the camera:
④
⑤
mm
48.08
Ø4.60
48.08
1. Access Through IP-Tool
2. Direct Access Through WEB Browser
IPC
Router
Network Cable
Network Cable
Switch
Computer
Mounting Template
DIRECT ACCESS THROUGH WEB BROWSER
①
Make sure that the camera and the PC are connected via LAN.
②
③
④
③
④
⑤
The default password of the administrator is “123456”
Modifying the IP Address: The default IP address of this camera is
192.168.226.201. Click on the row of the camera listed in the above table
to show the network information on the right hand. Modify the IP address
and gateway of the camera and make sure its network address is in the
same local network segment as the recorder’s.
For example, if the IP address of your computer is 192.168.1.4, then you
will need to modify the IP address of the camera to 192.168.1.x. After
modifying, please enter the password of the administrator and click the
“Modify” button to modify the IP settings.
Double-click the camera listed in the IP-Tool or manually enter the IP
address in the address bar of the web browser to connect IP camera.
Then follow directions to download and install the plugin.
Find the IP-Tool from the CD and then install the program onto your
computer. Run the IP-Tool program.
Modify the IP address and make sure its network address is in the
same local network segment as the computer’s.
Open your web browser and enter the modified IP address into the
address bar to login to the web client. Follow directions to download
the plugin to your computer. After that, enter the default username
and password to login.
Enter the username and password in the login interface.
Mounting Screws
Mounting Base
Mounting Template
Drywall Anchors
90°
Tilt
360°
Rotation
360°
Pan
Fixed Ring
