45
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Note:
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate the
equipment.
RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the
emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the United States.
During SAR testing, this device was set to transmit at its highest
certified
power level in all tested frequency bands, and placed in
positions that
simulate RF exposure in usage against the head with
no separation, and
near the body with the separation of 1
0
mm.
Although the SAR is
determined at the highest certified power level,
the actual SAR level of
the device while operating can be well below
the maximum value. This
is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the
closer you are to a
wireless base station antenna, the lower the power
output.
The exposure standard for wireless devices employing a unit of
measurement is known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg. This device is complied with
SAR for general population /uncontrolled
exposure limits in
ANSI/IEEE C95.1-1992 and had been tested in accordance with the
measurement methods and procedures specified in
IEEE1528.
The FCC has granted an Equipment Authorization for this model
phone
with all reported SAR levels evaluated as in compliance with
the FCC RF
exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section of
www.fcc.gov/oet/ea/fccid after searching on FCC ID:
