- 4 -
lock keypad.
3. In standby mode, long press * key to activate or deactivate
Silent mode.
# Key
1. In text editing interface, press "#" key to switch the text
input method.
2. When the keypad is locked, press left soft key and # key to
unlock.
5. Getting Started
5.1 SIM Card Installation
When you subscribe to a cellular network, you will receive a plug-in SIM card complete with your
subscription details, such as your PIN, and available optional services.
Caution
: Do not bend or scratch your SIM card. Avoid exposing your SIM card to static electricity,
water, or dirt.
Tips
：
Face the gold color contact point of SIM card towards the cell phone and push the SIM card
into the slot.
5.2 Battery Installation
Caution
: Install according to the illustration above to avoid breaking the battery connectors.
5.3 Charging the Battery
Insert the charger; the flash symbol on the charger plug must face upwards.
Connect the charger to a standard wall outlet and the battery power icon in the up-right corner of
the screen will start scrolling. When the battery bar stops scrolling, the battery charge is complete.
Press the two sides of the charger plug and disconnect the charger from the phone.
·
When the battery is low, a "low battery" message will display across the screen and the battery
icon will seem empty. If the battery level is insufficient, the phone will turn off automatically. Do
not use your phone under low battery state for an extended period of time or it may cause battery
damage.
6. Your Phone
6.1 Power On
·
Press and hold end key to turn on your phone, light the backlight, and display power on
animation.
·
If you do not insert a SIM card, or the SIM card has incomplete connection, your phone will
show "Insert SIM". In this condition, you can only access part of the menu and only permission
using some urgent calling.
·
If the
PIN
code is blocked, the alert message for inputting
PUK
code will display on the screen
before power on.
·
The phone will search the network automatically after power on.
If your phone registers to network correctly, the name of the network and signal strength will
