USING
A
VUR
A
PUL
SE
•
P
A
GE
1
2
• ALWAYS use hangtag to alert others that ozone may be present in the area
when machine is in use.
• ALWAYS wait for at least 30 minutes after the run cycle has finished before
re-entering the enclosed space.
Run the Avura Pulse
Mold, Odor and Volatile Organic Compounds (VOCs) Removal
While each space to be treated is different with many variables to be
considered, the following guidelines have been developed for removing VOCs
and odor-causing bacteria to maximize effectiveness and minimize ozone
exposure. In many cases, a properly prepared space that has the bulk of the
odor-causing material disposed of or wiped up, you may only need one or two
20 – 30-minute treatments to remove the odor. Difficult to remove odors, such
as pet urine, can take up to 2 – 4 hours to be effective.
Bacteria and Virus Sanitization
Ongoing scientific research demonstrates ozone’s efficacy to reduce and
possibly eliminate bacteria and viruses such as COVID-19. When used properly,
in concert with EPA-approved disinfecting cleaning products, the Avura
Pulse provides a higher level of sanitization than only using a liquid cleaning
product.
Below are our recommendations to maximize effectiveness and safety:
• Properly disinfect surfaces with an EPA-approved cleaning product such as
bleach on solid surfaces, including bathtubs, toilets and tile flooring.
• To sanitize areas that bleach and other similar cleaning products cannot
reach, such as television remotes, bed linens, upholstery, drapes and air in
the room or enclosed space, we recommend running the Avura Pulse for 20
minutes – 4 hours, depending on the size of the enclosed space.
• Always close all windows and doors before starting a run cycle.
Positioning and Placement
When positioning the Pulse in an enclosed space, do not obstruct the airflow
to the device. It is important to position the Pulse so that air from the room
can flow freely into and out of the machine. If possible, turn off the Heating,
Ventilation and Air Conditioning (HVAC) system. Otherwise, place the Pulse as
far away from the return air vent as possible.
NOTE: It is recommended to place the Pulse at least 5 ft. off the ground when
treating the entire enclosed space.
