6
Key Components
..
The key components listed below are for Re-clocking type
SDE-12R
only.
Components Made in USA for this product:
Name of Component
Manufacturer
M21315 (HD/SD-SDI) Auto-rate Reclocker
Mindspeed Technologies
Multi-Rate SDI Adaptive Cable Equalizer
Mindspeed & Gennum
Multi-Rate Dual Slew-Rate Cable Driver
Mindspeed & Gennum & Semiconductor
Data Communication IC
MAXIM
Components Made in Taiwan for this product:
Name of Component
Manufacturer
DC/DC Converter
Richtek
*Key components are listed by the manufacturer and are subject to change without notice
In order to achieve the Best Quality and Long Range coax cable run of up to 200m / 600ft,
you will need:
1.
Good Quality Cable
: We suggest using RG6 Belden 1694A Low Loss Serial Digital
coax cable because RG6 cables have better grounding than RG59 cables. RG6 is
for Digital Signal and RG59 is for Analog Signal.
2.
Good Quality BNC Connectors
: Contact Plating Gold plated pins provide
exceptional conductivity.
3.
Good Quality Installation
: Do not over cut the braid because it will affect the
grounding. The image will have lines and noise.
IMPORTANT NOTE: Cable & Connector for SDI HD Camera
Bare Copper
Jacket
Braid Shielding
Conductor
Dielectric
Contact Plating
Gold Plated Pin
