DES CRIP TION
PRE CAU TION S
FEATURES
PARTS INSTRUC TION
AV830PDIR
1.
Sony 720P CMOS sensor
2. CVBS 960H output, support 720P/60fps output meanwhile
. High resolution, 720P, true color recovering
.
Self-adaptive 2D/3D image denoising
5. Waterproof: IP66
6. simple operation
7. OSD menu
1. Use the Appropriate Power Supply.
The input power for AV830PDIR is DC12V/AC24V. Be sure to connect it to the appropriate power,
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user serviceable
parts inside. Any questions please ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
4. Do not place the camera in the following locations:
Locations where temperature is lower than -20 C or higher than 55 C;
Locations where humidity is higher than 90%;
5. Clean the CMOS faceplate with care.
When cleaning the CMOS panel, do not use strong or abrasive detergents, use a piece of lens
tissue or cotton tipped applicator and ethanol.
6. Do not attempt to aim the camera at the sun.
Do not attempt to aim the camera at the sun or other extremely bright objects, that cause smear
to appear irrespective of whether the camera is operating or not. This can damage the CMOS
(Complementary Metal Oxide Semiconductor).
7. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication device that
emits strong electromagnetic field, some irregularity such as noise on monitor screen may
happen.
wrong connection may cause malfunction and /or damage to the video camera.
AV830PDIR uses advanced imaging technology with resolution as high as 720P, CVBS 960H
output, support 720P/60fps output meanwhile, self-adaptive 2D/3D noise reduction..
AV830PDIR comes with a powerful OSD menu that include motion detection, digital zoom,
privacy zones, lens shading compensation, DPC, Auto electronic shutter, AWB, image
sharpening, etc.
1
DomeEnclos eprotectscameralensandbod y
2 Glasscoverscrewhole
3.Base
4.Wire out hole
5.Stages of a screw the lid
6.OSD
7.IR LED
8.Lens
9. Fou r install screws holes
1
2
3
4
5
6
7
8
9
(At bottom of the base)
FAR NEAR
TELE W IDE
