Avtex W153D, User Manual

Page: 22 / 60

In TV, if you first use the set or havnt tuned, the hint will display as follow: '
NOTE
AV ,SCART and YPBPR SETUP
17
VIDEO SETTING MENU
This unit will go into standby mode automatically with no signal input after 5 minutes.
The menu setup of AV/SCART /YPBPR modes is much the same as that of TV mode,
except the " " section is invalid and a bit difference in sound mode. It is not
repeated here. You can find it in preceding pages.
If the input source is SCART, this unit will automatically recognise its RGB and CVBS
signal. If RGB is recognised, it will auto switch into RGB mode, or else it will work at
CVBS mode. The relative information will be automatically displayed on the right upper
of the screen .
ANALOGUE TV
PLEASE TUNE -
4:50
PRESS AQT
If no signal input in AV, SCART, YPBPR the screen will show a similar signal to
the following figure.
While, if the input has no signal, the hint will display as this:
ANALOGUE TV
4:50
OR RETUNE
AV
NO SIGNAL
4:50
NO SIGNAL