In TV, if you first use the set or havn
'
t tuned, the hint will display as follow:
NOTE
AV and SCART SETUP
17
VIDEO SETTING MENU
This unit will go into standby mode automatically with no signal input after 5 minutes.
The menu setup of AV/SCART modes is much the same as that of TV mode,
except the " " section is invalid and a bit difference in sound mode. It is not
repeated here. You can find it in preceding pages.
If the input source is SCART, this unit will automatically recognise its RGB and CVBS
signal. If RGB is recognised, it will auto switch into RGB mode, or else it will work at
CVBS mode. The relative information will be automatically displayed on the right upper
of the screen .
If no signal input in AV, SCART the screen will show a similar signal to the following
figure.
While, if the input has no signal, the hint will display as this:
ANALOGUE TV
4:50
OR RETUNE
AV
NO SIGNAL
4:50
NO SIGNAL
ANALOGUE TV
PLEASE TUNE -
4:50
PRESS AND
HOLD DOWN AQT
