24
Press [SCAN] on remote control more than 3
seconds to auto scan.
Using the [ ] button to select the Auto Scan item,
and press [OK] or [ ] button to select Start item,
then press [OK] button;
A prompting message will be displayed to request that
you confirm, select OK and press the [OK] button to
confirm.
In the scan process, the scan result will be displayed in the Auto Scan window.
DVB FUNCTION SETUP
Note
: If you press the [SETUP] button during scanning, the operation is stopped and a prompting
message will be displayed at the bottom of Auto Scan window. Select OK and press [OK]
button to abort auto scan operation, and the channels found until then will be saved. And
select Cancel and press [OK] button to return to auto scan process.
Wait while the TV searches for the channels, this may take a few minutes.
"
"
"
"
Once you press [OK] button to start auto search operation, all the saved channels will be
cleared.
You can scan channels manually by setting scan parameters.
1. In setup menu, select Manual Scan item using
the[ ]button, and press [OK] or [ ] button to
select Start item, then press [OK] button.
2. Use [ ] button or enter you desired frequency
to search directly.
3. Select Scan item to start manual scan operation.
4. The scan result will be displayed on the manual scan
window, you can save the found channels or delete them if the TV has the same program.
"
"
Manual scan
Manual Scan
Freq: 177500KHz
Status
Found Channels
Scan
Auto Scan
Freq: 65000KHz
TV Total: 00
Radio Total: 00
Progress:
Status
Found Channels
40%
You can change every channel position as you like in channel remap window.
Channel Remap
Adjust channel
You can set your favorite channel, set parental control age for some channels or skip
channel in Adjust Channel window.
1. Select channel using [ ] button , Press [RED] button to set this channel as one of
your favorite channels.
2. Select channel using [ ] button , if you don't like this channel press [GREEN] button
to skip it .
3. Select channel using [ ] button, press [YELLOW] button to set this channel as a
protected one, to prevent children dialog from watching the undesired program.
Note
: If the password mode is set to be On, when you set a channel protected, a password
will be needed to inputted in the Protect Channel window. The default password is
000000
.
