Avtek Tension, User Manual, Page: 10 / 40

8
Do not touch projection surface with hands. Do not use chemical cleaning agents
. to clean the projection surface.
Do not write or draw on projection surface Do not disassemble the screen.
.
Use a soft cloth or brush to clean the projection surface. Use water and a soft cloth to clean the screen.
Note:
The screen may be operated as frequently as necessary but should not be
lowered and raised continuously. Doing so will cause the motor to overheat and power
to cut off. If this happens it will be necessary to wait until the motor has cooled down
sufficiently to resume operation.
NOTICE