CONNECTION
STEP1: Monitor Connection
Connect the monitor’s VGA D-Sub connector to the VGA jack of the VGA converter (A to A).
STEP2: DVR Connection
Connect the VGA converter with a RCA cable with BNC connector, or a coaxial cable to
DVR’s main monitor output jack (B to B).
STEP3: Power Connection
Connect the power connector of the VGA converter to the regulated power adapter (C to
C), and plug the adapter to the power outlet.
RESOLUTION SWITCH (Model 1 Only)
STEP1:
Turn the VGA converter to the rear side, and find a pinhole as indicated below.
STEP2:
Insert a paper clip to the pinhole as indicated below to switch the VGA output resolution
to 1024×768, or 1280 x 1024. The current resolution will be shown on your LCD monitor.