AVTECH Software, Inc.
Page 11
AVTECH.com
Room Alert 32S (RA32S-DAP-RAS)
Settings
Accessing Settings
To access your Room Alert’s settings:
1. Select
Settings
in the navigation bar to the left of your screen.
2. Next, enter your credentials in the
Username
and
Password
fields.
• If you did not save custom credentials to your Room Alert 32S already, enter these
default credentials:
○
Username:
admin
○
Password:
password
• Then select
Click Here To Access Settings
.
Navigating Settings
Settings has the following sub-tabs shown in the navigation bar to the left of your screen.
• Sensors
• Alarms
• Network
• Email
• SNMP
• Security
• Advanced
You may navigate to each of these sections by selecting the appropriate sub-tab. Settings
opens by default to the Sensor Settings page.
Saving Settings
To save a setting, click out of the field you just modified and notice that a notification bar
appears at the top and bottom of the page.
This notification bar contains the following items:
• A list of Settings pages you have unsaved changes on.
