MOTORIZED PAN AND SEQUENCE SETUP
On the DVR live view, click the channel which connects this camera to display in the full screen mode, and
select
to show the control panel:
NOTE:
Not all functions in the panel are supported for this camera. Please see the description below.
/
Left / Right
Click to move your selection up / down / left / right, or change settings.
Auto mode
Click to activate the auto function.
Before using it, you need to assign a specific function that will be enabled
when “
” is clicked. For details, please refer to the user manual of the
PTZ camera.
Preset point
Click to enter the PTZ preset point you want to see.
To pan the camera
Click
/
to move the camera manually.
To set a sequence group
Step1: Click
to display the preset point panel, and click
to go to the setting panel.
Step2: Click
/
to move to the point you want to configure as a preset point, and click the
numbering you want to appoint for this point. Then, wait till you see
(command sending)
appearing and disappearing on the DVR status bar.
NOTE:
Up to 16 preset points could be configured.
Step3: Repeat Step3 until you’ve added all the points you need, or click
to return to the “Goto”
panel.
Step4: In the “Goto” panel, select the numbering you’ve appointed for the preset points to check if
they’re working properly.