background image

   AVTECH Software, Inc.

 

Page 2 

AVTECH.com

GSM Modem w/USB (MOD-GSM-1)

Install Your GSM Modem

Do not use this accessory in hazardous (classified) locations or life safety applications. 

First, insert your mini-SIM card.

1.  Remove the SIM card cover on the back of the 

modem. (You may use a flat-blade screwdriver in the 

slot to help you slide the cover off.)

2.  Insert your mini-SIM card into the SIM card holder as 

shown here.

•  The SIM card’s metal contacts should face down.

•  Its notch should be in the lower-right corner.

3.  Replace the SIM card cover.

To extract the SIM card later, remove the cover and simply slide the card out of the holder.

For the next steps, see 

Configure Your GSM Modem

 on the next page. 

Don’t 

connect your GSM Modem to Device ManageR’s host system yet—you’ll do that in a later 

step.

Accessory Features & Specifications

Supported Operating Systems

Windows 8, 7, Vista, XP (32 and 64-bit)

Windows Server 2012, 2008 (32 and 64-bit),

2003 (32-bit)

Air Interface

GSM/GPRS/EDGE

Mobile Connection Type

3G/2G

Frequency Bands

3G: 800/850/900/AWS 1700/1900/2100

2G: 850/900/1800/1900

SIM Card Type

Mini

Included

No

Power Supply

USB

Included

Yes

Connector Type

USB 2.0 high speed compatible

Operating Temperature Range

-40° F to 122° F (-40° C to 50° C)

Compatible Products

Device ManageR software (with Dial Out Bundle)

AVT-170612-2.0.0

Summary of Contents for GSM Modem






Reviews: