Avtech AVZ592, System Configuration Manual, Page: 41 / 56

38
Detect
Item Description
External Alarm Enable or disable detection from external alarm-in device, and click the title “External Alarm”
(in blue) to set “N.O.” or “N.C.” depending on the configuration of your alarm-in device.
Motion Enable or disable motion detection.
Motion detection is not supported when the stream format is Motion JPEG.
When “ON” is selected, click “Detection” to enter the motion detection area setting page as
follows:
Sensitivity:
Set the detection sensitivity from the drop-down list: High, Normal or Low.
Area Setting:
Set the motion detection area by selecting the area grids with your mouse. Pink grids represent the
area that is not being detected while the transparent grids are the area under detection. You can set
multiple areas under detection.
Click “Clear All” to set the whole area undetected.
Click “Select All” to set the whole area under detection.
Duration Set the duration time for trigger recording (5 / 10 / 20 / 40 seconds).
Action
Here defines how the camera delivers alerts to you for any event.
Item Description
E-Mail Select the event type you want to receive E-mail notifications when it occurs.
Then, click the title “E-Mail” (in blue) to configure the media type or profile, file format (AVC
/ AVI) and record time (1 ~ 5 seconds) for the event video clip. If you don’t want event video
clips to be attached in the email, select “No” in “Email Attachment”.
The camera will send an Email to the E-mail address(s) you assigned in “Network”

“Mail” once the selected event type occurs.
FTP Select the event type you want to receive FTP notifications when it occurs.
Then, click the title “FTP” (in blue) to configure the media type (H264 / JPEG / MPEG4), file
format (AVC / AVI), and record time (1 ~ 5 seconds) for the event video clip.
The camera will upload the captured video clip to the FTP site you assigned in “Network”
 “FTP” once the selected event type occurs.
SMS Select the event type you want to receive text message when it occurs.
The camera will send a text message to the phone number you assigned in “Network”

“SMS” once the selected event type occurs.
Alarm Out Select the event type you want to trigger the alarm-out device to work when it occurs.
Then, click the title “Alarm Out” (in blue) to configure the trigger rule (LOW / HIGH).
Record Select the event type you want to enable event recording when it occurs.
Audio Alert Select the event type you want to enable audio alert when it occurs.