10
e) In the “Networking” tab, select “Internet Protocol Version 4 (TCP/IPv4)”, and select
“Properties”.
f) In the “General” tab, select “Use the following IP address”, and set the IP address
as described below.
Note:
It’s recommended to note down the current settings first and then change as
instructed. It’s helpful when you need to restore the PC network settings for
connecting to Internet later.
g)
Click “OK” to close the “Internet Protocol Version 4 (TCP/IPv4) Properties” dialog
box. Then, click “Close” to close the “Local Area Connection Properties” dialog
box.
10
h) In the “Networking” tab, select “Internet Protocol Version 4 (TCP/IPv4)”, and select
“Properties”.
i) In the “General” tab, select “Use the following IP address”, and set the IP address
as described below.
Note:
It’s recommended to note down the current settings first and then change as
instructed. It’s helpful when you need to restore the PC network settings for
connecting to Internet later.
j)
Click “OK” to close the “Internet Protocol Version 4 (TCP/IPv4) Properties” dialog
box. Then, click “Close” to close the “Local Area Connection Properties” dialog
box.
