Avtech AVRF-7B-B, Instructions Manual

Page: 5 / 39

INTRODUCTION
The AVRF-7B-B is a high performance, GPIB and RS232-equipped instrument capable
of generating up to 750V into 50Ω loads at repetition rates up to 5 kHz. The output
pulse width is variable from 90 ns to 10 us. The rise / fall times (20%-80%) are less
than 8 ns.
Instruments with the "-P" model suffix can generate up to +750V, whereas instruments
with the "-N" model suffix can generate up to -750V. Instruments with the "-PN" suffix
can generate both polarities.
A 50 Ohm load is required for proper operation. The output stage may be damaged if
the output is not terminated into a 50Ω load.
The AVRF-7B-B is a highly flexible instrument. Aside from the internal trigger source, it
can also be triggered or gated by external TTL-level signals. A front-panel pushbutton
or a computer command can also be used to trigger the instrument.
The AVRF-7B-B features front panel keyboard and adjust knob control of the output
pulse parameters along with a four line by 40-character backlit LCD display of the
output amplitude, pulse width, pulse repetition frequency, and delay. The instrument
includes memory to store up to four complete instrument setups. The operator may use
the front panel or the computer interface to store a complete “snapshot” of all key
instrument settings, and recall this setup at a later time.
This instrument is intended for use in research, development, test and calibration
laboratories by qualified personnel.
5