Avtech AVRF-2-B Instructions Manual Download Page 4

Page: 4 / 39

USE A 50Ω LOAD.................................................................................................................22

OPERATIONAL CHECK.................................................................................................23
PROGRAMMING YOUR PULSE GENERATOR............................................................27

KEY PROGRAMMING COMMANDS....................................................................................27

ALL PROGRAMMING COMMANDS.....................................................................................28

MECHANICAL INFORMATION......................................................................................30

TOP COVER REMOVAL.......................................................................................................30

RACK MOUNTING................................................................................................................30

ELECTROMAGNETIC INTERFERENCE..............................................................................30

MAINTENANCE..............................................................................................................31

REGULAR MAINTENANCE..................................................................................................31

CLEANING............................................................................................................................ 31

WIRING DIAGRAMS.......................................................................................................32

WIRING OF AC POWER.......................................................................................................32

PCB 158R5 - LOW VOLTAGE POWER SUPPLY................................................................33

PCB 235C - HIGH VOLTAGE DC POWER SUPPLY...........................................................34

PCB 104F - KEYPAD / DISPLAY BOARD, 1/3....................................................................35

PCB 104F - KEYPAD / DISPLAY BOARD, 2/3....................................................................36

PCB 104F - KEYPAD / DISPLAY BOARD, 3/3....................................................................37

MAIN WIRING.......................................................................................................................38

PERFORMANCE CHECKSHEET...................................................................................39

Manual Reference: /fileserver2/officefiles/instructword/avrf/AVRF-2-B,ed5.odt.

Last modified July 21, 2020.

Summary of Contents for AVRF-2-B








































Search results

Summary of Contents for AVRF-2-B

Reviews:

Brands by name

Popular brands

Avtech AVRF-2-B, Instructions Manual

Search results

Summary of Contents for AVRF-2-B

Reviews:

Brands by name

Popular brands