11
Step3: Select the IP address you want to
configure to show the IP address setting
page.
Then, click the drop-down list of “Network”
to change the network type from “DHCP”
to “Static”.
The default port number is 88. You may
change it to any value (such as 8080) if
you know the port number of 88 is
blocked.
Then, note down the IP address and port
number you see here. You might need
them for port forwarding later.
Note:
It’s not recommended to use the port number of 80 since some phone carriers might block this
port for network access.
Step4: Select “Apply” to confirm all your
changes. Then, wait till you see “
Done
”
or “
Fail
” in “Status”.
Regardless which message you see,
proceed as instructed below:
For
Done
, you’ll return to the new device
page.
For
Fail
, select “
” on the top right side.
You’ll later be prompted to select “DDNS” or
“Local IP”. Select “DDNS” and return to the
new device page.
