FREQUENTLY-USED FUNCTIONS
19
Note:
The allocatable IPS (image per second) in each image size for a DVR is fixed.
When allocating IPS to each channel, select “LOCK” to remind you of the
remaining IPS in each image size available for the rest of the channels.
5.2.2 Detailed record setting
Right-click to display the main menu, and select “ADVANCED CONFIG” “RECORD”.
Note:
Please DO NOT change the date or time of your DVR after the recording
function is activated. Otherwise, the recorded data will be disordered and
you will not be able to find the recorded file to backup by time search. If
users change the date or time accidentally when the recording function is
activated, it’s recommended to clear all HDD data, and start recording
again.
ADVANCED CONFIG
CAMERA
MANUAL RECORD ENABLE
ON
DETECTION
EVENT RECORD ENABLE
ON
ALERT
TIMER RECORD ENABLE
ON
NETWORK
PRE-ALARM RECORD
ON
DISPLAY
OVERWRITE ON
RECORD
EVENT RECORD ALL CHANNEL
OFF
REMOTE
KEEP DATA LIMIT (DAYS)
OFF
RECORD CONFIGURATION
SETUP
EXIT
1) MANUAL
RECORD
ENABLE
Set the manual recording function on / off.
2) EVENT RECORD ENABLE
Set the event recording function on / off.
3) TIMER RECORD ENABLE
Set the timer recording function on / off.
4) PRE-ALARM
RECORD
Select to enable or disable the pre-alarm function (ON / OFF).
When pre-alarm and event recording functions are both activated, the DVR will
record 8MB data before an alarm / motion event is triggered.
5) OVERWRITE
Select “ON” to overwrite previous recorded data in your HDD when the HDD is full.
When this function is on and the HDD is full, the DVR will clear 8GB data from the
oldest for continuous recording without notice.
Summary of Contents for avc-798b
Page 44: ...REMOTE OPERATION 39...
