PUSH VIDEO
16
PUSH VIDEO
Push Video is used to help you get notified quickly when an event occurs. For this camera, you can configure the camera to
send you Push Video when there’s any motion event. You’ll get notified via your smart phone / tablet as soon as possible
when a motion event is detected. Once you open the message, you’ll see video playback of the event to help you quickly
know what just happened and respond if needed.
NOTE
This function is available only for
SUPERVISOR
and
POWER USER
accounts. For details, please check “Account user levels” at
page 32.
NOTE
This function requires network transmission and the receipt of Push Video on your smart phone / tablet depends on the transmission
speed of the network.
How to enable Push Video
In the address book, enable
Guard
and try to trigger a motion event to see if you can receive a push message
successfully.
NOTE
Before using this function, make sure your device is configured to the internet as instructed in “Connecting camera to internet” at
page 6 and a microSD card is inserted to this camera.
