The AVR-EB4-B-NXPB-SOD123W includes an internal trigger source, but it can also be
triggered or gated by an external source. A front-panel pushbutton can also be used to
trigger the instrument.
The AVR-EB4-B-NXPB-SOD123W features front panel keyboard and adjust knob
control of the output pulse parameters along with a four line by 40-character backlit
LCD display of the output amplitude, pulse repetition frequency, and delay. The
instrument includes memory to store up to four complete instrument setups. The
operator may use the front panel or the computer interface to store a complete
“snapshot” of all key instrument settings, and recall this setup at a later time.
This instrument is intended for use in research, development, test and calibration
laboratories by qualified personnel.
MODEL HISTORY
The instrument mainframe output has the same waveform electrical specifications as
the previously-supplied customized AVR-EB4-B-NXPB S/N 12432 (supplied in 2011).
The included test jig is different. Jig and pulser differences may cause differences in
measured recovery time values between instruments.
6
Summary of Contents for 14258
