3
GENERAL
QUALITY AND SAFETY:
This projection screen is in accordance with the safety regulations in DIN standard 19045 and DIN
56950
. The screen fabric is comply with DIN 4102 part 1 and the specifications of the according data
sheet.
WARRANTY:
The warranty period for production deficiencies is 5 years for the frame elements and 24 months
for the projection surface. Mobile projection screens are developed for indoor use only. Any damage
and consequential damage caused by outdoor use is not covered by warranty.
FRAME ELEMENTS:
The frame elements, legs and additional elements are maintenance-free!
PROJECTION SURFACE:
The projection surface is packed into a separate soft bag to avoid any damage by the frame parts,
bleaching and discoloration. Additionally following handling instructions have to be adhered to:
! Do not bring printed and coloring objects (instructions, magazines, etc.) in contact with the
projection surface !
! Do not mark the projection surface !
Colors penetrate the projection surface and cannot be cleaned anymore!
Store the projection surface cleaned and dry at room temperature only!
The projection surface has to be folded with the front layer inside; in order to avoid soil and
damage.
COLD BREAK
A projection foil must never be stored or transported below 0 ° C. There is a risk of a cold break!
The film becomes very brittle and splinters like glass! When transporting the projection surface at low
temperatures, do not unfold the surface unless it has reached its full elasticity at room temperature.
Otherwise there is the risk of cold break of the projection screen. When folding the projection surface,
insert the enclosed foamed plastic foil between snap buttons and surface to avoid permanent marks.
CLEANING OF THE PROJECTION SURFACE:
Use a white clean cotton cloth saturated with clear water (optionally mild soap water) and gently
wipe the area in one direction (no circular motion). Wipe dry with another cotton cloth.
To clean a stubborn stain, use methylated spirit and follow the same procedure.
Clean rear projection surfaces in case of imperative only!
Subject to modifications, errors expected !
