QR12PABT QR15PABT User Manual
Package Contents
Please check the contents to ensure that the product has been received in good condition.
•
QRPABT portable PA unit
•
2 x VHF handheld microphones
•
Mains power lead
•
IR Remote control for media player
•
User manual
If you find any accessory is missing or the product has arrived with any problems, please
contact your retailer at once.
Rear panel
Connection
Your new QRPABT portable PA unit may arrive with you with the internal battery charged.
Before connecting to the mains, switch the unit on and check the POWER LED. If it is green,
there is charge in the battery. If it is red, then you will need to charge the battery before using
away from a mains supply (see “
Charging the battery
” below)
Connect the QRPABT portable PA unit to the mains using the appropriate mains IEC lead
supplied. You may otherwise opt to connect the spring terminals at the rear to an external
12Vdc supply, such as a car battery, or use the internal battery if charged.
1.
USB input
2.
SD card slot
3.
Microphone ECHO level control
4.
MIC inputs volume control
5.
TREBLE EQ
6.
VHF microphone volume controls
7.
RCA LINE IN input
8.
6.3mm jack Guitar/MIC 1 input
9.
6.3mm jack MIC 2 input
10.
3.5mm LINE IN input
11.
External 12-15Vdc power input (4A min.)
12.
Media player LCD display
13.
Media player mode/transport controls
14.
BASS EQ
15.
Music volume control
16.
Talk-over switch
17.
VHF receiver power switch & LED
18.
RCA MIX OUT line output
19.
Power/Charge LED indicators
20.
Power switch
21.
IEC mains inlet & fuse holder
