156.738UK, 156.739UK User Manual
Remote control
1.
POWER
LED on / standby button
2.
WHITE ONLY/OFF
Select white with colour off or colour with white off
3.
Preset colours
Preset static colour buttons
4.
MODE +/-
Step up or down through program sequences
5.
ZONE
Select zone 1, 2, 3 or all zones to control from handset
6.
WHITE
/
Increase or decrease white brightness
7.
COLOR
/
Increase or decrease colour brightness
8.
COLOR +/-
Step up or down through static colours
9.
SPEED +/-
Step up or down through program speed
Remove the clear tab from the handheld remote to engage the battery (replacement CR2025 button cell)
The handset can be used to control the master controller and infinite slave controllers (156.739UK) on 3 separate zones.
Press ZONE 1 on the handset and power up the master controller.
Within 5 seconds of powering up, hold down the Power on (1) and WHITE
(6) buttons together, then within another 5
seconds, press the RED colour button (3) and the LED indicator on the controller will flash 3 times to confirm pairing.
To pair slave controllers, the master controller must be powered up, since they are paired through the master.
Power up the slave controller and within 5 seconds, hold down the POWER ON (1) and WHITE
(6) buttons together.
Now press the Zone button (1, 2 or 3) to which this slave controller will belong and it will be paired on that zone.
To select which controller is being operated, use the ZONE buttons to select zone 1, 2, 3 or all simultaneously
To switch LEDs on, press the POWER button (from standby, the last setting is resumed)
To switch to static white only colour, press the WHITE ONLY button
To switch to colour without any white component, press the WHITE OFF button
Preset colour buttons provide direct access to 6 static colours. All colours can be accessed using the COLOR +/- buttons.
To increase or decrease white content, use the WHITE brightness buttons.
To increase or decrease colour content, use the COLOR brightness buttons.
To use the internal colour chase programs, press the MODE +/- buttons, which will step through preset sequences.
The colour chase speed can be adjusted using the SPEED +/- buttons
Press POWER to enter standby mode (all LEDs off)
To switch all zones off, it will be necessary to select ALL ZONES
Specifications
Model
RFQ5 (Master)
SLQ5 (Slave)
Voltage
6 - 24Vdc
Output current
3 x 2A (RGB) + 1 x 3A (white)
PWM frequency
512Hz
Operating temperature range
-30°C to +80°C
Output connections
Blue, red, green, white, V+
Range
15m (max. from remote)
15m (max. from master)
Protection
Reverse/short circuit, overload, temperature
Carrier frequency
433.92MHz + 2.4GHz (sync to slave)
2.4GHz (sync from master)
Battery : remote
3V (CR2025 button cell - included)
N/A
Dimensions : remote
115 x 52 x 5mm
N/A
Dimensions : controller
87 x 21 x 9mm
87 x 21 x 9mm
Weight
59g (cont remote)
22g
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd
