High Output LED Tape Installation Guide
Power requirements
It is imperative that the power supply should have higher than the rated capacity in Amps (A) for the current required to
power the length(s) of LED tape installed. Please see the table below for reference.
Tape length
5m
10m
15m
20m
25m
30m
Current
2A
4A
6A
8A
10A
12A
Suggested PSU
153.759UK
153.760UK
153.761UK
153.762UK
153.763UK
153.764UK
Lyyt high output LED strips can also be operated with Lyyt single colour 12/24V controllers, amplifiers or dimmers.
Specifications
Stock ref.
156.776UK
156.777UK
156.778UK
Colour
Warm white (3000K)
Natural white (6000K)
Cool white (6000K)
Number of LEDs
120/m
Beam angle
140°
Cut intervals
5cm
Reel length
5m
LED type
Epistar™ SMD3528
LED spacing
8.3mm
IP rating
IP65
Power consumption / metre
9.6W
Luminous flux (Lumens per metre)
720lm/m
Light intensity per LED
2400mcd
Cross-section
10.5 x 2.55mm
Weight
210g
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright © 2019. AVSL Group Ltd.
