Avsl Adastra DM25 User Manual Download Page 8

 

953.108UK, 953.109UK User Manual 

Troubleshooting 

 

No power LED on control 
panel 

Ensure IEC lead is in good condition and connected properly  
Check mains inlet fuse 
Ensure POWER switch is on 

LED display is lit but no 
output 

Check input signals and condition of input connection leads 
Check level controls are turned up  
Check file type on USB or connection via Bluetooth is OK  
Check MASTER, MIC, LINE IN or MEDIA controls are turned up 
Check speaker output terminals are connected correctly 
Check speakers are working (test on another amp if available) 

USB player will not play 
audio from media  
 

Press PLAY on transport controls  
Check memory device is connected properly (remove and re-insert)  
Check file types 

 standard mp3 files are required  

Check memory device works on a PC or Mac for standard playback  

No connection via Bluetooth  

Check that the sending device is connected to the correct “MP3A” ID 

 

Check the volume output level of the sending device  

Output is very loud or 
distorted 

Check level of input signal is not too high 
Turn down Level, Bass and Treble controls or reduce level of input signal 
Ensure Hi-Z line level input(s) not connected via MIC input 

Output is working but at 
very low level 

Check input audio source level is not too low 
Turn up Level, Bass and Treble controls 
Check for quiet recording of media files on USB  

Feedback from microphone 

Face microphone away from speakers and monitors 
Turn down MIC volume control 

Amplifier overheating 

Ensure cooling vents are clear from debris and dust 
Check that 4

Ω or 8Ω 

speakers are not connected to 100V terminals 

Ensure total 100V speaker wattage is lower than the amplifier rating 
Ensure that 100V and 

4Ω or 8Ω speakers are not both connected

 

Ensure that total load connected to 4-16

Ω output is not less than 

4

 

 

 
 

 

 

 

Disposal:

 

The “Crossed Wheelie Bin” symbol on the product means

 that the product is classed as Electrical or 

Electronic equipment and should not be disposed with other household or commercial waste 

at the end of its useful life. The goods must be disposed of according to your local council guidelines. 

Hereby, AVSL Group Ltd. declares that the radio equipment type 953.108UK and 953.109UK are compliance with 

Directive 2014/53/EU

 

 

The full text of the EU declaration of conformity for 953.108UK is available at the following internet address: 

http://www.avsl.com/assets/exportdoc/9/5/953108UK%20CE.pdf

 

 

The full text of the EU declaration of conformity for 953.109UK is available at the following internet address: 

http://www.avsl.com/assets/exportdoc/9/5/953109UK%20CE.pdf

 

 

Errors and omissions excepted. Copyright© 2021.  

AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ 

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland.

 

Summary of Contents for Adastra DM25









Reviews: