Installation Steps
NOTE: Actual application may vary slightly from illustrations.
3
4
Page 2 of 2
5
7
8
6
Care and Cleaning
• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
© 2015 Lund International, Inc. All rights reserved.
Auto Ventshade
TM
, the Auto Ventshade
TM
logo and the AVS
TM
logo are trademarks of Lund International, Inc.
Lund International
800-241-7219 • Visit us at lundinternational.com
™
Press visor firmly in place and verify position.
Remove tape liner by pulling on free ends. Apply pressure
to all flange edges to ensure proper adhesion.
Beginning at the rear, insert the visor flanges into the
window channel.
Beginning at the rear, use a putty knife to
realign the weatherstrip back into the window
channel. NOTE: Use caution not to cut or
damage the weatherstrip!
Repeat Steps 1-8 for remaining window
Remove the tape liner from the front & rear flanges.
Peel back 2” of tape liner from each end of top flange.
top flange
free end
remove
remove
free end
Raise window slowly and leave up for 24
hours to secure visor to window channel.