CONFIGURATION MENU
To enter and move through the configuration menu: .
1. Turn the ignition ON and wait until the monitor boots up.
2. While the front facing camera is displayed on the monitor press the
/OK
button to
switch to Standby mode (the LED will turn blue). If the monitor has timed out press
/OK
once to wake the monitor up, then press again to switch to Standby mode.
3. Press the
-
button to enter Settings mode.
4. Press the
button to cycle through the menu options.
5. Press the
t
or
u
button to select the menu required.
6. Press
/OK
to select the item or
-
to go back a step.
7. Press
t
or
u
to adjust level/options.
8. Press
/OK
to select the item.
9. Press
to save the new setting.
10. Press
-
to exit the menu.
11. Remember to press
/OK
again to switch back to record mode (LED will turn green).
NOTE: If the monitor goes to sleep push any button to wake it up.
MENU ITEM - MOVIE MODE
SUB MENU
DESCRIPTION
OPTIONS
Movie mode
Selects the recording resolution and
frame rate
FHD 1080P@30FPS (default)
HD 720P@30FPS
HD 720P@60FPS
VGA@30FPS
Movie quality
Selects the quality of recording
Super fine (default)
Fine
Movie clip time
Selects the length of each clip
OFF
1 minute (default)
2 minutes
3 minutes
5 minutes
Sound record
Turns ON/OFF audio recording
ON (default)
OFF
Mic sensitivity
Selects the sensitivity of the
microphone
Standard (default)
Low
Menu continued overleaf ...