2
Connecting different components
Connecting to a monitor
Please check the monitor resolution before connecting to a monitor.
Using HDMI&VGA Port : 1920 x 1080p
<Warning>
Use of HDMI certified cable is recommended when connecting to a HDMI Monitor.
Connecting to a camera
Please connect 1080p, 720p, 960H or NTSC/PAL camera using the recommended cable
PoC Camera
If PoC cameras and PoC adaptor are connected to a DVR, DVR supplies necessary power to cameras through
coaxial cable, and DVR can control cameras through coaxial cable without RS-485 cable installation.
Recommended Cables
* Depends on manufacturer and models.
<Warning>
Transmission distance will be affected by cable types and installation site environment
Transmission distance of cables shows differences based on the attenuation factor at 750MHz.
(dB/100m < 25dB is recommended)
Foamed or high-foamed trishield cable is recommended.
Coaxial cable and BNC connector must have 75Ω impedance.
Careful to cable deformation due to high pressure over the cable.
Don’t pull the cable with too much force.
During the arrangement of the coaxial cables at the rear of the rack, if tied too tightly, inside/outside
insulator of cable could be deformed, so tie it loosely within cable’s curvature range.
Cable Category
HD-SDI transmit
distance(*)
Applications
5C2V
about 90M
Analog cable
4C-FB(T), 4C-HFB(T), RG59
about 140M
High-foamed cable (Double or Trishield
recommended)
5C-FB(T), 5C-HFB, L-6CHD, RG6
about 180M
Cable for HD-SDI
5C-HFBT
about 200M
Cable for HD-SDI