Test Pattern Controls:
Test Pattern Sections
•
These switchers have a built-in test pattern generator, this is for
assisting with set up or trouble shooting issues.
•
Select
ON
and it will send a 1080p test pattern out desired output
•
Distributed systems don’t have the ability to tell you exactly where a weak point or issue may be.
How to Use the Test Pattern Once you have it
ON
•
If you can see the pattern on display, but the source is not passing a signal, check the source’s connection
path into the switch for issues.
•
If you have the pattern on but it is not showing on the display, check the connection path from the switch to
display for issues.
EDID Control:
EDID Management
•
EDID management allows the user to set the EDID
•
To make your selection per source click the drop down and select desired EDID. Please reference the
switcher’s manual for full list of EDID options
•
EDID management can help optimize and/or limit the video/audio being output by source to the switch
System Settings:
System Setting Section
•
The IP settings pictured above are all default, out of the box settings
•
The CX42 and CX62 switchers come with a static 192.168.1.239 IP address
•
DHCP can be enabled for configuration with a different Router IP Address
•
Network information can be entered manually in non-grayed out area. Then click apply for modifications to
take effect
•
Port Alias Setting is useful for labeling input and outputs. Input and Output Alias/Labels will change across
all areas of the switcher’s Web GUI interface.
