W e b C o n t r o l s
q u i c k s ta rt g u i d e
One major benefit of working with AVPro Edge matrix switchers is the fully featured, built-in
web GUI. This control mechanism is available on all models. In this Quick Start Guide we will
walk you through getting connected, then explain everything you are able to access in this web
GUI.
Getting Connected to the Web GUI/Web OS:
The web GUI can be accessed by simply connecting to the same network as your matrix switcher.
You can do that by typing the unit’s IP address into any web browser.
1. Connect your AC-CX42-AUHD or AC-CX62-AUHD to a network via the Ethernet port on the
unit itself. Make sure you are not using one of the HDBaseT input or output ports.
2. Connect your laptop/tablet/phone to the same network
3. Open a web browser (Chrome/Firefox/Safari) on the laptop/tablet/phone
4. In the browser bar type in the default IP address which is 192.168.1.239 (No user ID or
password is needed to access the control system)
5. Start controlling your switcher
Getting Connected Important Notes:
If you are not utilizing a 192.168.1.xxx Router IP Address you will need to enable DHCP or
set the IP manually. To do this, a direct connection with the switch is needed which you can
accomplish using a RS-232 cable or Micro USB to USB cable. “My Uart Serial Communicator” is
free software you can download and will help you get connected to the switch, you can find the
download here:
www.avproedge.com/drivers
Find the download link at the bottom of the page, please reference the product manual for
more information on serial communication protcals.
In the rest of this quick start guide we will be referencing the 4x2 version of the switcher, please
note that everything applies to the 6x2 version as well.
AC-CX42-AUHD
&
AC-CX62-AUHD
